COMMON MATERIALS
WOOD
1/8” baltic birch plywood
1/4” baltic birch plywood
5mm bamboo plywood
Veneered Plywood (Walnut, Cherry, Oak, Etc.)
We can also work with a variety of other wood types.
ACRYLIC
Opaque Acrylic
Transparent or Frosted Acrylic
Clear Acrylic
Mirrored Acrylic
Acrylic comes in a variety of thicknesses, but we commonly work with 1/8”, 1/4”, and 3/8”. Acrylic has a protective masking on the surface that protects the acrylic from burn marks/fogging during the cutting and engraving process.
CARDBOARD
Cardboard sheet is approximately 5mm thick. We can cut and engrave cardboard. It engraves light brown.
LEATHER
Leather comes in a variety of weights, colors, and textures. We can cut and engrave leather. When we work with leather we put mask on the surface to protect it from burn marks.
MAT BOARD
Mat board comes in a variety of colors. It can be cut and engraved. Mat board engraves light brown. When we work with mat board we put mask on the surface to protect it from burn marks.
PAPER
We can cut a variety of paper and engrave it if it’s thick enough. Sometimes we put a protective masking on the paper while we’re cutting to protect the surface from burn marks, however sometimes the paper is too fragile for the mask.